JGAurora A5S (A5) E3D-V6 Mount MAIN BODY ONLY
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Remix of the REmix because there was a STEP file included so was easier to make modification. The original…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 275
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a Remix of the REmix because there was a STEP file included so was easier to make modification.
The original posted had a problem with Z-Axis that wiring would be crashed in the frame when going all the way to 320mm.
This Remix of the original did not have any Fan mounting so also was not good to be used.
My remix is make and can be used with my setup and can go up all the way to 320mm.
Yes you will loose around 10mm in X-Axix and Y-Axis.
but if your glass plate is loose then you can move by those 10mm and clamp it that way.
This is my System: https://www.thingiverse.com/thing:4558015
Print Settings
Printer:
JGAurora A5S
Rafts:
No
Supports:
Yes
Resolution:
0.20
Infill:
50%
Filament:
Generic ABS
White
Category: 3D Printer Parts