JGAurora A5S Tool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UPDATE: I added a Small Parts Drawer that can be used with this Tool Holder.https://www.thingiverse.com/thing:4412920…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 279
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
UPDATE:
I added a Small Parts Drawer that can be used with this Tool Holder. https://www.thingiverse.com/thing:4412920
Update:
Added a Allen Wrench Spacer so the Allen Wrench will not fall of.
Same With Tool Spacer.
Both can be printed together with Tool-Box Section when align proper way in slicer or printed then glue together.
If you would like the Inserts be a little bit taller just scale with the Z direction in your slicer.
This is my Tool, Screw or other stuff Holder.
I made this as modular so you can print and assemble any way you want.
The tool Holder is mounted from Top Of the Printer on the side.
No Glue needed for Assemble. The Connector are tight in. If they are loose maybe some glue will work.
Box can be used by it self or you can put Inserts in it. The inserts can be removed for easy use.
There is also two different Spacer. One is 34mm and the other 75mm.
The whole assembly is connected by connectors. Need one on each side.
NOTE:
You must print the "Top" to start the assembly.
Print Settings
Printer:
JGAurora A5S
Rafts:
Doesn't Matter
Supports:
No
Resolution:
20
Infill:
20
Filament:
Amazon Basic PETg
Black
Notes:
It's hard to work with the PETg filament so I printed Inserts From PLA Filament.
Category: 3D Printer Accessories