Sharpie honeycomb box oragniser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have been using Sharpie Marker Color Blender by MakeAnything to color my prints, and I have realized, that I have no…
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 393
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I have been using Sharpie Marker Color Blender by MakeAnything
to color my prints, and I have realized, that I have no proper holder for Sharpies.
There it is! It holds 10 Shapries, tip down (yes tip down is the correct way) or tip up. Height and size makes color tops visible and secure locked in the box.
As with all My honeycomb designs, the holder can be nicely packed side to side for clean footprint.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.25-0.30
Infill:
20
Filament:
Devil Design PLA
Notes:
Wall thickens 0.45 (default for Prusa Slicer @0.4 mm nozzle). No support is required, infill around 15% will do the job (small volume in the base).
Pause and change filament feature was used to obtain translucent insert in the middle of the walls. Either Cura plug in or [Prusa](https://www.amazon.com/3D-Printer-Prusa/s?k=3D+Printer+Prusa&linkCode=ll2&tag=thingiverse09-20&linkId=28c787aef7c5a20cf2004b821dd161bf&language=en_US&ref_=as_li_ss_tl) Slicer (M600).
Category: Office