uBitX Speaker Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple enclosure made to hold a standard 2 inch 8 ohm speaker for use with the uBItX transceiver. It…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 255
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple enclosure made to hold a standard 2 inch 8 ohm speaker for use with the uBItX transceiver. It includes a strain relief to support the cable connected to the speaker.
Print Settings
Printer Brand:
Robo 3D
Printer:
R1 ABS + PLA Model
Rafts:
Yes
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
30%
Notes:
Printed in PLA
Post-Printing
The strain relief is printed separately and attached with 2 M3x12 self tapping screws (tight fit) The speaked is held into the enclosure with 4 dabs of hot glue around the perimeter. Use small plastic feet to relieve the screw heads underneath the strain relief.rnrnAlternatively you could glue the strain relief in, and omit the screws.
How I Designed This
Fusion 360
Category: Electronics