uBitX Case for PLA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of John's excellent uBitX case designed for PET, which you can find here:…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a remix of John's excellent uBitX case designed for PET, which you can find here:
https://www.thingiverse.com/thing:2732866
Changes include:
Closures using 3mm self tapping screws, instead of clamshell style latches.
Clearances for fitting parts and through holes made slightly looser, to accommodate the stiffness of the PLA.
I have included a link to the original posting, you can get the custom knobs and microphone holder from there.
I also added an alternative case back, with an additional hole to accommodate a 13mm round fuse holder.
Thanks to John for graciously sharing his Fusion 360 project to allow this remix.
Print Settings
Printer Brand:
Robo 3D
Printer:
R1 ABS + PLA Model
Rafts:
Yes
Supports:
No
Resolution:
0.2
Infill:
30%
Notes:
If you print the custom knobs in PLA, try increasing the size in your slicer by 5 - 10% for an easier fit.
Category: Electronics