Blokus Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an insert for Blokus. It consists of four containers for the pieces.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 328
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an insert for Blokus. It consists of four containers for the pieces. The gameboard is placed upside down in the box, and each container is attached to it to hold it in place.
The new version is easier to print and includes a lid, which is necessary since the game box's lid isn't all that tight (at least on my copy).
There are several versions of the game. This was designed for the Mattel 81983 version, which is the Scandinavian version. The inner box is 55 mm deep, and the board's height is 25 mm. If your game is roughly in those proportions, you should be able to use this.
Here, you'll find a laser-cut version.
Support My Work
Should you want to, you can support me on Patreon. If you cannot become a patron, remember that likes are free and make designers happy! :-)
On Patreon, getting a commercial license for my designs is also possible.