PI-KVM Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case I designed for PI KVM setup that has a feature for a DB9/Serial port for routing GPIO out of the case.…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 369
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a case I designed for PI KVM setup that has a feature for a DB9/Serial port for routing GPIO out of the case. No hardware is needed, it should snap together.
Updated the front/bezel part as the feature that holds the HDMI-CSI board as it had a weak point.
For stronger snaps and a better finish, it is best to print with the back of the top and bottom parts on the build plate.
07-31-21 Added the latest revision of the Fuson360 files
08-01-21 Added a not DB9/Serial version of the top
This is the HDMI to CSI2 board that I am using https://bit.ly/3lhPbe8
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: Overture PETG
Category: 3D Printing