Voxelab Aquila Toolbox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is my take on the Voxelab Aquila toolbox, The one that comes with the machine on the SD card is ok, but has to…
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 400
- Wydruki
- 3
- Wyświetlenia
- 1930
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Here is my take on the Voxelab Aquila toolbox, The one that comes with the machine on the SD card is ok, but has to slide into the rails which means it slides around on the machine.
The standard toolbox looks nice in the front left, but does mean taking a few screws out on the case to get in into the rails.
This version simply uses the 2x front frame screws and then 2x T nuts and 10mm bolts to hold the rear to the frame rail. This is to stop any movement for this version so it cannot slide in the rails.
Print Settings
Printer:
Voxelab Aquila
Rafts:
No
Supports:
No
Resolution:
200
Infill:
10
Filament:
Technology Outlet PLA
Any
Category: 3D Printer Accessories