Cetus Z-axis endstop holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a recreation of the Cetus Mk2 standard Z-axis endstop holder. When mine broke, I searched online and found a…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a recreation of the Cetus Mk2 standard Z-axis endstop holder. When mine broke, I searched online and found a set of files for most of the printed parts on the cetus, including this piece - except it's wrong. I printed the version in that file, and it's about 15mm too short in some critical dimensions. That's right, fifteen millimeters.
So, I imported that STL into Fusion, and essentially traced it for the beasic outline and shape, and used measurements taken from my original broken endstop to fill in the incorrect dimensions.
Here's a link to my Fusion model: https://a360.co/2v5vOte I hereby place it under the same Creative Commons - Attribution - Non-Commercial - Share-alike license as the STL.
Print Settings
Printer:
Cetus MkII Standard
Rafts:
No
Supports:
Yes
Resolution:
0.25mm
Infill:
25% gyroid
Filament:
Nexeo Novamid ID 1030 Nylon
Translucent
Notes:
Printed on a heated bed with a Garolite LE surface at 250C. Supports were generated on build plate only, and a 10mm brim was used.
Category: 3D Printer Parts