1 / 2
Baby Yoda (Grogu) Ring — zdjęcie 1
1 / 2

Baby Yoda (Grogu) Ring

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A ring with Baby Yoda's (Grogu) head in U.S. sizes

Ocena
5 / 5
Polubienia
32
Pobrania
163
Wydruki
1
Wyświetlenia
771
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This is a baby Yoda/Grogu ring in U.S. sizes 4-16 in half size increments.

These rings probably only work with SLA/resin printers. I doubt they would work well on filament printers since they generally don't have the precision needed. Maybe with a really well dialed in machine, a small nozzle, low layer heights and taking it slow. Let us know if you get a good result with filament.

You can take a fine brush and model paint to color in his eyes and ears. Spray with clear lacquer to seal the paint and resin.

Not sure about your ring size? Here is a ring sizer that worked for me.

Ring sizes

Here is a chart to convert from U.S. ring sizes to metric for our friends outside the U.S.

U.S. SizeInner Diameter in mmU.S. SizeInner Diameter in mm
414.881120.57
4.515.2911.520.98
515.701221.39
5.516.1012.521.79
616.511322.20
6.516.9213.522.61
717.321423.01
7.517.7314.523.42
818.141523.83
8.518.5415.524.23
918.951624.64
9.519.35  
1019.76  
10.520.17  

Print Settings

Printer: Elegoo Mars 2 Pro

Supports: Yes

Resolution: 0.05 (50μm)

Material: ABS like resin, green

Note:

I printed these in ABS like resin on a SLA printer.

There is a possibility that even cured resin shouldn't be in contact with skin for long periods of time. Seal it with a clear coat to reduce this possibility.

Tagi