Extended magazine basepad for TM and DB Glock (airsoft
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted to make the basepad of my TM clone airsoft glock a little longer after I made a magwell for it, so here it is.…
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 168
- Wydruki
- 0
- Wyświetlenia
- 1395
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
Wanted to make the basepad of my TM clone airsoft glock a little longer after I made a magwell for it, so here it is.
There are two versions the 25cm and 35cm long types. Charging the magazine with gas would require you to slide the basepad forward. This can be done by pulling up the spring quide then sliding the basepad out to the front. It should click into place giving you access to the input valve. When done just slide it back until it clicks.
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Select Plus
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
25%
Filament:
Any PLA, ABS
Notes:
Take note of the dimensions of your magazine as you might need to scale it up or down by about 2% to account for expansion/shrinkage.
Category: Sport & Outdoors