Extended Raspberry Pi + Adafruit LCD Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A beefed-up version of Jeremy Blum's neat Raspberry Pi case with a lid designed to hold the Adafruit 16x2 character…
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 38
- Wydruki
- 1
- Wyświetlenia
- 381
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
A beefed-up version of Jeremy Blum's neat Raspberry Pi case with a lid designed to hold the Adafruit 16x2 character LCD. This version has a better fit to the device, and protects the RCA and audio jacks (but might block the RCA, I've not tested it). I additionally intend to provide options for the button panel, like a solid cover or flip-back lid.
Instructions
Print me!
Included is a .Thing file already plated for you. This model should be pretty tolerant of various layer heights.
Press-fit the LCD into the top half, and the Raspberry Pi into the lower half -- then gently align them and press together. Be careful with the GPIO pins!
Currently, the GPIO and the snap-fit are all that hold this case together. I plan to add bolt holes soon.
Category: Computer