Raspberry Pi 0 + RGB2HDMI 12bit board case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on the RGB2HDMI case by user BRAINCELL. A case for a RGB2HDMI plus a 12 bit board. There are holes for all the…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 492
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Based on the RGB2HDMI case by user BRAINCELL.
A case for a RGB2HDMI plus a 12 bit board. There are holes for all the usual pi I/O + the video input from your vintage computer + a hole to get the serial port through..
My remix is not as nice looking but it's fully costomisable and the OpenSCAD source files are available.
You can attach the Pi with hex head M2.5 20mm screw and nuts
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Infill:
20
Filament:
- PLA
Notes:
No need for support, I added a hull within the screw holes so it can print without support.
I measure the original STL file main dimensions then recreated it in OpenSCAD.
Category: Computer