DIMM Memory Organizer SDRAM DDR2/DDR3/DDR4/DDR5 (stackable) - Heatsink enabled
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on djkrice organizer for SO-DIMMs. Fits 10 DIMMs, can fit more if you edit the .scad. Supports RAM heatsinks
- Ocena
- 4 / 5
- Polubienia
- 47
- Pobrania
- 621
- Wydruki
- 9
- Wyświetlenia
- 2076
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Based on djkrice organizer for SO-DIMMs.
Fits 10 DIMMs, can fit more if you edit the .scad (it also has the measurement for SO-DIMMs).
Can be stacked.
The honeycomb pattern on the bottom is to save filament without being detrimental to sturdiness.
There is now ( december 2025 ) a variation that accepts RAM heatsinks.
Print Settings
Rafts: No
Supports: No
Resolution: 0.3mm
Infill: 20%
Notes :
The only "difficult" part to print is the undersides holes for stacking. It shouldn't result in any problem if your printer works fine. It is optional if you don't want to stack them.
How I Designed This ===================
Reverse-engineered from djkrice .STL, then converted to OpenSCAD and expanded. Changed bottom pattern to honeycomb.