1 / 3
Test Tube holder with space for Schlenk / Straus vent — zdjęcie 1
1 / 3

Test Tube holder with space for Schlenk / Straus vent

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Test tube holder at a 45° angle. Holes are made such that you can see what you are doing and the contents inside.

Ocena
0 / 5
Polubienia
3
Pobrania
28
Wydruki
0
Wyświetlenia
315
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

This holder is made for test tubes with a diameter of about 18mm. Schlenk / Straus vents can be aligned to the top, limiting rotation as much as possible while it is mounted inside the holder. The test tube is mounted at a 45° angle. And there are “windows” made from all directions making it much easier to see what you are working with while the tube is placed. 

This version is optimal for tubes with a length of about 7.5cm from the bottom of the tube to the start of the Schlenk / Straus vent.

The mount moves the center of mass downwards, making the tube much more stable, and it is much harder for it to fall over, which is especially ideal in an environment where you have limited space or within a glovebox. 

 

Print instructions

Print with supports and works fine at a 0.2mm layer height.

Tagi