Mount for Korg TM-60 Tuner Metronome
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi friends, I don't know for you but I have a Korg TM-60. It is a good tuner / metronome. But if you have one you have…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
Hi friends,
I don't know for you but I have a Korg TM-60. It is a good tuner / metronome.
But if you have one you have seen that the back stand is especially weak. And if offers only one angle.
I found that a bad idea so I made my own mount for it.
It offers two angles, 30° and 45° and is easy to print and to use. You only need to turn it 90° to choose the angle.
Let it in your bag or on your desk (or both), and the day it's broken, print one again.
For printing, I suggest you to use infill of 30/40% because a part is relatively thin. But you can print it à 0.2mm.
Have a good music.
Bonjour chez vous.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.2mm
Infill:
30-40%
Category: Music