Ravenclaw Crest
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix I did of a model on Thingiverse a few years back.
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 501
- Wydruki
- 6
- Wyświetlenia
- 1838
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Public Domain
This is a remix I did of a model on Thingiverse a few years back. The original was taken down, so I cannot credit the author, but they did a great job.
This is a minor remix of the original where I removed some weird geometries and holes. I also reduced the file size to 10% and 15% of the original size (200MB).
This is not a multi color model, I switched the filament a few times throughout the print.
Print instructions
Supports: No
To get the multi-color effect, I changed the filament a few times during the print.
0.0 - 4.0 - Gray
4.1 - 6 - Blue
6.1 - 10 - Gold
10.1 - 12 - Light Blue
12.1 - 15 - Blue
Note: These values would only work if printed at 100% scale and 0.10mm resolution.