Paint Booth
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully 3D Printed paint booth for airbrush or painting.
- Ocena
- 5 / 5
- Polubienia
- 297
- Pobrania
- 854
- Wydruki
- 4
- Wyświetlenia
- 12 787
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 3D printed paint booth that are 80% printed and only required few other parts to make it works.
List parts needed:
- 150mm Fan (GDSTIME AXIAL Fan 15050)
- Ducting
- M5 nuts and screws
- LED Lights
- A3 sized panel (can be acrylic, wood, perforated cardboard/plastic) (5mm thick)
- Strong glue
- Tape to seal the paint booth
The assembly of the paint booth is straight forward but if u stuck just refer to the model given and try to follow it.
If your printer build volume is too small, you can cut the model up or use delta or larger printer to print it.
Make sure you use strong glue like super glue or epoxy as hot glue is not strong enough for it.
This is optional:
- You can cut the panel up to make it look nice and professional.
You can modify the paint booth to your liking but please follow the license for this model.