Creality CR-X Purge Bucket (Model 2019)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This purge bucket was inspired by jnsanders1983. As the original did not fit to my CR-X and the author is not allowing…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 523
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This purge bucket was inspired by jnsanders1983.
As the original did not fit to my CR-X and the author is not allowing remixing, I create a new one from scratch.
This is a SNAP ON purge bucket with the basket as close as possible to the printer bed for best nozzle reachability with the aim to be most compatible to the original (if you e.g. created a lid)
This purge bucket requires a silicone strip.
I cut a Silicone Rubber Sheet (High Temp Plate Mat 1mm thick)
No tools required
Just snap it on the right side of the Z-axis.
I recommend to use Marilin 2.0 where you can use G12 X S2 as the clean pattern.
Edit:
Added a new design (V3) which enables the filament to slide into a seperate bucket.
Slicer support
To utilize the Purge Bucket in Ultimaker Cura see: Purge Bucket script for Cura
Print Settings
Printer Brand:
Creality
Printer:
CR-X
Rafts:
Yes
Supports:
Yes
Resolution:
0.2
Infill:
30%
Filament: 3D FREUNDE PLA black
Notes:
If using cura use "cube sub" fill.
Category: 3D Printer Parts