MacBook m1/m2/m3/m4/Pro/Max stand (2022-2024)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MacBook m1/m2/m3/Pro/Max stand (16/14/13") - tested with 16" 2022 m1 and 14" 2024 m3.
- Ocena
- 4,833 / 5
- Polubienia
- 51
- Pobrania
- 517
- Wydruki
- 5
- Wyświetlenia
- 4035
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the 4th revision of my MacBook Pro M1/M2/M3 Pro/Max 13"/14"/16" stand. Now 1 degree further back-tilted (and new text).
Pro-tip: Small macbook pros and all macbook airs need felt pads for a snug fit. Add the pads on the back of the front-side (not on the front of the backside as shown in the photos with the white/silver stands)! This gives a very snug fit, and a better angle than if the pads are added behind the macbook (see the detail photo of the black stand)! 16" shouldn't need pads.
It's also available on Thingiverse: https://www.thingiverse.com/thing:5378841, and is based on a design by @julienpmorand.
I've personally tested it with 2022 16" m1 pro 2024 14" m3 pro and even a 2024 Macbook Air (both with added pads).
Changes from the original design:
- Using much less material
- more streamlined design
- tilted the angle a bit more than 3 degrees back, for a more ergonomic angle
I printed with “Supports Everywhere”, 20% standard infill and brim. I've tried with Adaptive Cubic also, to save a little material and time, but it doesn't really make a huge difference.
NB:
If you need it without the text, let me know. I currently don't have the "original" without it ;)