Harbor Freight 43831 Adapter for LowRider2 CNC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm building a LowRider2 CNC router but didn't have a Dewalt Router as specified. I did have a Harbor Frieght rotary…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I'm building a LowRider2 CNC router but didn't have a Dewalt Router as specified. I did have a Harbor Frieght rotary cutter (RotoZip Like) tool which I figured would be a good first test of the CNC. This adapter will allow you to attach the rotozip to the same holes used for the Dewalt DWP611.
Print Settings
Printer:
GeeeTech A10m
Rafts:
No
Supports:
Yes
Resolution:
0.24
Infill:
30%
Filament:
any PETG
Notes:
I used 250c Nozzle temp and 50c bed temp.. .
The square hole is sized so you can get a wrench in to change tooling.
There's a notch above the screw which must be align with a key on the router or it won't sit straight.
The screw came off the base that came with the router.
Category: Machine Tools