Drip watering nozzle, pass-through and T including EZt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kinda a real WIP. I made a series of drippers, trying to keep them from spraying instead of dripping and tried a bunch…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 651
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Kinda a real WIP. I made a series of drippers, trying to keep them from spraying instead of dripping and tried a bunch of designs. Just like the store-bought ones, if you don't have low water pressure it can be hard to get consistent results.
That said, here they are for the world to see and play with. They fit the 4mm tubing.
At full 100 psi these can pop out. I made them loose to be easy to insert, if there's any real usage I'll beef them up a bit.
If someone tries them on a low pressure system I'd love to know what results they get. My feeling is they wouldn't flow a lot.
Print Settings
Resolution:
0.2
Notes:
the T's must be printed with the manual support side facing the bed. The pass-through should also be flipped big side down.
Snap off the supports from any T's you printed.Category: Outdoor & Garden