Temporary PTFE Coupler (Prusa MMU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For other Prusa MMU stuff:https://www.thingiverse.com/AbeFM/collections/abes-mmu2-stuff I find that when I have…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 250
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
For other Prusa MMU stuff: https://www.thingiverse.com/AbeFM/collections/abes-mmu2-stuff
I find that when I have filament from one PTFE, and I feel it into a second one, after the print gets going these can bump together and cause friction issues.
This is a simple part to let your PTFE have something solid and square to hit against without restricting filament travel.
This version uses a heat-set nut so that the coupler can thread onto the existing PTFE that would connect the MMU to the Mk3's extruder.
Post-Printing
Don't forget to set your nut! I use a soldering iron. Check for expanded plastic blocking the hole before use.
Category: 3D Printer Accessories