HICTop D3 Hero Extruder Lever Replacement TenLog TL-D3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My extruder lever broke on my D3Hero. I heard this is common, but I wanted to get the printer up and running ASAP so I…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 331
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
My extruder lever broke on my D3Hero. I heard this is common, but I wanted to get the printer up and running ASAP so I drew this up. It's a quickie but I think it'll work fine, I'm already on my first print! :-P
I had a Temperature Error on my printer, when I tried to load filament - the bearing fell off after the hole stripped and landed on the thermocouple solder joints. Weird but better now.
This should also work for the Tenlog Hands 2, and probably their TL-D3 Pro I believe.
Print Settings
Supports:
No
Resolution:
Any
Infill:
15
Filament:
ANY PLA
Notes:
Use a lot of tops/bottoms/walls so it's strong! I went with 4 or 5.
Category: 3D Printer Parts