1 / 2
D3 Hero Tenlog Stock Ducts with nut holes — zdjęcie 1
1 / 2

D3 Hero Tenlog Stock Ducts with nut holes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Note: It looks like HICtop posted an updated part, and it looks to be better than mine so check it out at…

Ocena
0 / 5
Polubienia
3
Pobrania
36
Wydruki
0
Wyświetlenia
289
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Note: It looks like HICtop posted an updated part, and it looks to be better than mine so check it out at https://www.hic3dprinter.com/pages/model and see for yourself.

Broke the fan shroud on my HicTop D3 Hero while trying out other designs. When I went to put it back, I found it really hard to hold the nut. I downloaded this design from Tenlog's site.

I 3D Builder hacked some hexagonal holes, thickened up the mounting bar and drew in manual supports.

I've only printed with slicer generated supports so far but I suspect these will work!

Print Settings

Supports:

No

Category: 3D Printer Parts

Tagi