1 / 8
See New Version Legacy: MMU2 Filament Slack Wallet — zdjęcie 1
1 / 8

See New Version Legacy: MMU2 Filament Slack Wallet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

New version!! https://www.thingiverse.com/thing:4329697 Uses Prusa parts, no new dividers required. For other Prusa…

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
146
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

New version!! https://www.thingiverse.com/thing:4329697 Uses Prusa parts, no new dividers required.

For other Prusa MMU stuff: https://www.thingiverse.com/AbeFM/collections/abes-mmu2-stuff


This is avery early part for keeping your new MMU from jamming up every time it tries to feed/take slack from the filament.

I was having all sorts of problems and didn't want to mount the spools so far behind the printer.

This set up gives me a lot of flexibility. Right now I'm using it with the included OEM spool holders but plan to revert to my pre-MMU set up feeding this box.

All I'm including are the 4 brackets (and the two which fit the PTFE in case you need to print them with different settings to get the right fit).

Join the discussion at https://shop.prusa3d.com/forum/user-mods-octoprint-enclosures-nozzles--f57/wallet-style-filament-slack-take-up-t25027.html

You will need 6 pieces of ~3mm thick plexiglass cut in matching rectangles of 8x10 INCHES - that's 20x25 cm for people who live in countries where medical services are a human right.

I put a SLIGHT angle on the holders so the filament will take a bend in the proper direction, and attach sides as shown. Once the angle is right, I put a nail in to hold it.

This is totally a work in progress and I'm open to suggestions!

Brief test print using 3 materials, all five channels. https://shop.prusa3d.com/forum/how-do-i-print-this-printing-help--f55/multi-material-unit-petg-tpu-pla-t25418.html

Print Settings

Supports:

No


Notes:

You could use a raft or brim if you have adhesion problems, but you likely own a Prusa and shouldn't have any concerns.

Custom Section ==============

Category: 3D Printer Parts

Tagi