1 / 2
Beehive Shave Brush Handle ~ 24mm hole for knot — zdjęcie 1
1 / 2

Beehive Shave Brush Handle ~ 24mm hole for knot

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed hollow so that you can fill it with something solid and heavy. I use Durham’s Rock Hard Water Putty. It is…

Ocena
0 / 5
Polubienia
5
Pobrania
37
Wydruki
0
Wyświetlenia
232
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

Designed hollow so that you can fill it with something solid and heavy.

I use Durham’s Rock Hard Water Putty. It is cheap, fast, easy and does not create excessive heat as it cures.

Hole for knot should be 1-2mm larger diameter than knot base.

Leave yourself 10-15 mm at the top to glue the knot in with 2 part epoxy.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/ajJXWp2BJhM

Category: 3D Printing

Tagi