Umbrella Holder / Stand for Wall Mounting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My design for a wall mounted stand to store 3 umbrellas.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 218
- Wydruki
- 2
- Wyświetlenia
- 1336
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
My design for a wall mounted stand to store 3 umbrellas. I have included 2 alternatives for the bottom bracket, one to allow drainage to the floor and the other with a sealed bottom to store the drips .
The mesh pattern on the front face allow for a screw driver to pass through for easier fixing to the wall.
No reason why this stand could not be used to store fishing rods, steel rods etc.
There is also a stencil part for drilling the mount holes which could also be thickened up in a slicer if you need a packer behind the mounts.
Print instructions
Should print well in PETG without supports.
Suggested layer height = 0.2mm