Seperate End Pieces of Open Cable Chain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I separated the end pieces and removed the springs from the original files provided.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
NOTE: This is a reuplaod from an old Thingiverse model of mine. Since then I designed my own, in my opinion improved and superior drag chain. I recommend you check it out before printing this.
https://www.printables.com/model/220142-open-drag-chain-optimized-for-printing
-------- Orignal post below ----------------
I wanted to have the end pieces separate from each other because I use different settings for the chain links and the springs. In the original thing these were just provided as a pair including springs.
Print Settings
Printer:
Two Trees Sapphire Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament:
Redline Filament R-PLA
Signalschwarz (Siganl Black)
Category: 3D Printer Accessories