WLToys 144001 dirt tires (maybe 124019/18 and 104001?)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My design for bigger tires. Hope you find it usefull ;)
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 206
- Wydruki
- 1
- Wyświetlenia
- 1483
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
For use on grass and gravel. Might not work so well on asphalt. The bigger diameter (~90mm) is useful in taller grass. If you prefer the underside of the printed part to be on the outside/inside (maybe because you use a textured printbed), feel free to mirror the TPU.stl. I tested the first print and it worked right from the printbed. The hexagonal hole is a tight fit depending on your printer tuning.
Front wheel is slimmer (25mm) vs the wheels on the back (30mm). Just for the looking :D
I used the following settings:
PLA (or PETG): 3 perimeter, 15% infill, 4 top and bottom layers, temp as needed, support!
TPU: 2 perimeter, 0% infill, 5 top and 4 bottom layers, temp as needed, NO support ;)
The two parts fit together tight and you should be able to use them without glue. However, it might be best to glue them together anyway.