3DSets 2.2 Wheel B Modifications
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here are some modifications I put together to widen the stance of the Wheel B set for the 3D Sets Buggy. Spacer: Makes…
- Ocena
- 0 / 5
- Polubienia
- 43
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 1674
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Here are some modifications I put together to widen the stance of the Wheel B set for the 3D Sets Buggy.
Spacer: Makes the front wheels a bit wider and grips the foam tire core for less lateral tire movement. The goal was to stop the tires coming off the rim. It didn't work as well as I liked, so I glued them using Gorilla Glue gel super glue, as suggested by more experienced RC enthusiasts. Still running the spacers, though.
Front and rear inner wheels: These increase the offset and provide a deeper axle socket so the rear axles don't strip out.
Front Wheel Shaft: replacement shaft for the front wheel that sits further into the wheel to provide a more solid mount. I had problems with the orignal design going crooked and breaking.
Print Settings
Printer:
hand-built i3 clone
Rafts:
No
Supports:
No
Resolution:
200
Infill:
15
Filament:
Any Any
Any
Category: R/C Vehicles