3DSets 2-piece brake rotor and hub
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wheel hub spacer for Rancher or Landy. Pushes the wheels 11 mm further out and adds a nice 2-piece disc brake rotor…
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 96
- Wydruki
- 1
- Wyświetlenia
- 795
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
Wheel hub spacer for Rancher or Landy. Pushes the wheels 11 mm further out and adds a nice 2-piece disc brake rotor because racecar. Hubs must be printed with supports. Print the rotor in silver and the hub in black...or orange...or pink. Whatever floats yer boat.
Rotor attaches to the hub with 6 M2x6 screws. I suggest drilling and tapping the screw holes.
The hub is predrilled for a 12 mm bolt pattern.
Hub size is 7.9 mm outer, 8.2 mm inner.
Use a longer 25 mm M3 bolt to attach through the wheel and hub to the axle or 6 M2 bolts, if your wheels support it.
Post-Printing
Tap mounting holes for an M2 screw
Drill the hole in the center of the hub for an M3 screw (3.175 mm or 1/8")
Assemble the disk rotor to the hub using 6 M2x6 screws
File to fit
Category: Vehicles