Socket Keeper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Disappointed in the Horror Fright metal socket rails, I designed my own. Set 1: 1/2 inch. Large rail holds 6 sockets…
- Ocena
- 4,333 / 5
- Polubienia
- 112
- Pobrania
- 922
- Wydruki
- 4
- Wyświetlenia
- 4582
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Disappointed in the Horror Fright metal socket rails, I designed my own.
Set 1: 1/2 inch. Large rail holds 6 sockets ranging from 1" up. Small rail holds 7 sockets ranging from 15/16" down.
Set 2: 3/8 inch rail that holds 10 sockets
Set 3: 1/4 inch rail that holds 12 sockets
Coming soon: metric equivalents with rounded, rather than angled, corners so I can tell the sets apart by feel.
Sept 2020 - added three rails for 1/2" drive.
Print Settings
Printer:
hand-built i3 clone
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
25%
Filament:
Hatchbox PLA, ABS, or ASA
Any
Category: Hand Tools