1 / 1
Caliper depth gauge foot - Wide — zdjęcie 1

Caliper depth gauge foot - Wide

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Foot that fits on the end of your caliper to help measure depths across a wide hole accurately.

Ocena
0 / 5
Polubienia
8
Pobrania
40
Wydruki
0
Wyświetlenia
317
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This foot is wider than most at ~200mm. 

I printed this with a brim. Any loss of bed adhesion will impact the accuracy of the tool.

Press an M3 threaded insert into the hole in side. Snap the base of your caliper into the foot. Finger tighten the M3 screw to keep the foot attached to the caliper. 

This print fits all of my calipers: a no name brand dial, Mitutoyo digital, and Mitutoyo dial. If it doesn't fit your caliper I've attached the Fusion360 file so you can modify it.

Tagi