1 / 8
E3D Revo nozzles holders for Prusa MK3S on the LCD supports — zdjęcie 1
1 / 8

E3D Revo nozzles holders for Prusa MK3S on the LCD supports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

snap them on the sides of the LCD supports

Ocena
5 / 5
Polubienia
21
Pobrania
64
Wydruki
5
Wyświetlenia
618
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

Nozzle holders for the Revo Nozzles of the E3D Revo Six hotend.
They snap into the holes of the stock LCD supports of MK3S (maybe other models as well, I don't know).
I made 3 models with slightly different hole sizes: S, M and L. I use the M (printed with prusament PLA with 0.2 layer height. I Printed them oriented as the stl model comes (with the clamps vertical). I set the overhang threshold angle to 15, so that it makes no support on the bottom slot (see pic).

PS: If you are interested in the knob as well, you can find it here: https://www.printables.com/model/197398-prusa-satelites-knob

 

Tagi