Decking door handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fairly minimalistic door/hatch handle designed to fit between decking boards.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I'm very happy with the discrete hatches for storage in my porch and wanted something correspondingly discrete to open them. These ones don't even require any screws - just stick the handle in from the front and put the wedge in the slot on the inside.
You may have to do some simple adjustment of the handle depth and/or wedge depending on your decking - this one is designed for 25mm boards. (Oh, and the wedge in the picture is a bit narrower than the final model, which works perfectly fine as well.)
The thin part is 2mm, so if your gaps don't match this approximately you may again have to adjust.
Handle in pictures was printed using a 0.6mm nozzle with 0.2mm layer height on a Prusa Mini in PETG. I would recommend PETG or some other more elastic filament than PLA.