Dacia Duster 2 Phone Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I printed the brodit style mount from the Nibirul thing but I found that if I applied a even a little pressure it…
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 253
- Wydruki
- 4
- Wyświetlenia
- 3903
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I printed the brodit style mount from the Nibirul thing but I found that if I applied a even a little pressure it popped off the dash.
I remedied it by copying the design from scratch in Tinkercad then adding an cross brace that is inserted after the holder is in place. That way it cannot come off the dash at all, it is super secure.
Print instructions
Category: 3D Printing Print Settings
Printer Brand: Monoprice
Printer: Select Mini
Rafts: No
Supports: No
Resolution: .218
Infill: 50% on the holder 100% on the brace.
Filament: Sunlu PLA+
Notes:
The brace is a snug fit but that is intentional so it does not fall out.
I stuck a magnet holder on the front of mine and it works great.
This is will probably need printing in PETG.