Deltaprintr Strud clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Strud-clamp for the Deltaprintr. Usefull as cable-management. I reuploaded the clamp as a .stl file since…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a Strud-clamp for the Deltaprintr.
Usefull as cable-management.
I reuploaded the clamp as a .stl file since some problems experienced with the dimensions. See the pictures for the dimensions.
I printed it at 50mm/s 100%infill
Also did a scale in Z-axis by 3 times see second picture
Print Settings
Printer Brand:
Deltaprintr
Printer:
Deltaprintr Assembled
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.20
Infill:
100
Notes:
There are no special settings needed.
You can print it at 100% infill with a speed of 20mm/s and it should take about 5 minutes to print.
It is a pretty small part so you may want to cool it as it otherwise may soften and melt a bit.
Category: 3D Printer Accessories