Steamdeck/Keyboard stand platform. (Requires separate SD stand print, link in description)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to work with Nestea's "Steam Deck Stand with Anker 8 in 1 USB-C Hub" to connect a keyboard for desktop mode use
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 4783
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to work with Nestea's Steam deck stand. I wanted to create a mount to firmly connect my steam deck to a small PCB keyboard for desktop use (and to have a good charging location). Add rubber feet on the PCB to avoid sliding.
I'm using a small ortholinear PCB keyboard (Plaid) and is designed around the 98mm height of this particular board. If someone has a similar PCB stack keyboard they can modify for those dimensions.
I haven't modified the original stand, and so I've simply threaded bolts directly into drilled holes in the body. Not the most secure, but if I have issues, I'd remix the original design to include reinforced mounting holes to thread into. Right now, care needs to be had to make sure the parts align well when marking to manually drill.
Not too large and so printable on my Prusa Mini. I am including the stand as an integrated part of the model, but the size would be large for me to print (esp considering that I had the original stand already printed). If you have a larger printer you should be able to print and avoid the need for bolts, but I wont confirm myself.
I've also included just the PCB mount section of the final design if someone needs to fit check the PCB clip features. prints in about a quarter of the time as the full mount design. don't waste plastic/time.