1 / 1
TT02 Prop Shaft Adapter for custom CF drive shaft
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prop Shaft Adapter for making custom carbon fiber driveshaft for TT02/TT02B RC models.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 1584
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (22)Powiązane
Custom prop shaft adapter for making a custom carbon fiber driveshaft for the TT02/TT02B models.
Items needed:
- Carbon Fiber Tube (McMaster Item# 5287T79) - 0.25 inch ID, .378 inch OD.
- Epoxy, recommend Urethane based epoxy like JB Weld Plastic Bonder (SKU 50139)
- 3D printed prop shaft adapter (current STL makes 3x total)
Instructions:
- Print the prop shaft adapter. This is compatible with the stock or the Aluminum prop cups of the TT02/TT02B. Recommend printing this in Tough Resin or Glass Filled Nylon (ie. via Shapeways). FDM printing is NOT recommended. The model is slightly oversized. The adapter is designed to be a snug friction fit as such, minor sanding of this adapter maybe needed to properly fit this to your prop shaft cups. Sand it until you get a very tight fit but not overly tight.
- Test fit and cut the carbon fiber tubing to size. Length needed can vary between 110-113mm.
- Once you've got everything to size, apply some epoxy to the end that goes in to the CF tube. DO NOT apply epoxy to the end that goes in to the prop shaft cups.
- Let the epoxy cure fully (typically 24 hrs).