Custom Lidded Box - OpenSCAD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a box which I made based on Hybris Labs Instructable here:http://www.instructables.com/id/Creating-a-custom-…
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 370
- Wydruki
- 1
- Wyświetlenia
- 1396
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a box which I made based on Hybris Labs Instructable here: http://www.instructables.com/id/Creating-a-custom-sized-box-for-3D-printing-with-O/
I resized the box and lid and moved the tab to the lid rather than the box.
If you want to change the size of this box in Customizer please see the comments in the openSCAD file first! You will have to move the lid so it does not overlap the box, and move the tab on the lid so it does overlap the lid corner.
Print Settings
Printer Brand:
MakerBot
Printer:
MakerBot Replicator (5th Generation)
Rafts:
Yes
Supports:
No
Resolution:
.20 mm
Infill:
10%
Notes:
2 Shells
Light Grey PLA
125 deg C
Takes ~7h15m to print, uses 84 g material.
New Makerbot Extruder +
Category: Tool Holders & Boxes