Artillery Genius PopZ
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Decorate the Z-axis of your Artillery 3D printer with these Batman caps that will rotate as you print!
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 69
- Wydruki
- 2
- Wyświetlenia
- 641
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Small decorative caps to place on your Z axes. They fit over the top bolt.
The 2-part design will allow you to design other models and change according to the mood of the day :-)
Tested on an Artillery Genius V1, but I think it must be the same bolt pattern on the V2 or Sidewinder X1/X2.
If the Batman model is not held tightly enough on the cap, attach it with a tiny piece of double-sided tape, or a dot of hot glue.
---- Edit 28/12/22 ----
Following a request from Akshay, I have added a filled version of the base, to use the model as a paperweight.
To be printed with a 100% infill.
Genius-PopZ-Base-Filled.stl