Dual extruder-updated bmg mount for CR-10
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model allows you to mount 2 extruders
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 269
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
this allows 2 extruders to be mounted on one side of the cr-10.
please consider (not necessary but will give a better result personally I use the original stepper motor with single lead scrow it work fins as long as the stepper driver are active... ) dual z-axis upgrade or using a stronger stepper motor for Z-axis.
please print this with ABS as PLA will become soft if your motor overheats temp is high or you do long prints.
zip ties are required to hold in the Wires.
a little bit of bends is expected with this design but not to the point were it hit your print if that happened then you maybe didn't print this will.
you may want to use M3x10/16 and x20 for regular extruder if the original scrows were short///for the BMG scrows, the original should be enough
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
0.32
Infill:
100%
Filament: 1.75mm ABS blue
Notes:
nozzle size I used in this print is 1.0mm
Category: 3D Printing