PTFE tube joiner with coupler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PTFE tube join
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 135
- Wydruki
- 1
- Wyświetlenia
- 1356
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of my BMG clone adapter.
https://www.printables.com/model/198386-bmg-clone-adapter
a PTFE tube joiner using the cr-10 PTFE Tube connector.
you should be able to join two regular PTFE/Capricorn or a mix of those tubes.
info:-
I did upload 5 part of the same design with various measurement the one that worked for me is the T = thread 11mm and ptfe=tubing hole 5mm
I did add others than this measurement including:-
T11-ptfe5.5
T11-ptfe4.3
T10-ptfe5.5
T10-ptfe5
T10-ptfe4.3
please use what fit your needs.
please USE IT WITH CATION AND AT YOUR OWN RISK.
if not printed correctly it may fail andplease put some 2 part epoxy on the threaded part to hold it in more securely other than that the thing is working great for me.
Instruction :-
1- Make sure you have clean-cut were you want to join these tubes.
2- Insert the first tube only 1/2 the way (mark 26mm then insert it to the mark).
3- Insert the second tube the other 1/2 and make sure you push it a little bit more (NOT two much) to make sure both tubes connect with no issue.
4- Make sure there is nothing touching the couplers or anything in its way you may want to put tape on it (the tape part is not necessary it's just in case).
Print Settings
Printer Brand:
Monoprice
Printer:
Select Mini
Rafts:
No
Supports:
Yes
Resolution:
0.2625
Infill:
22%
Filament: 1.75mm PLA blue
Notes:
if you are willing to put this in heated chamber please consider printing this with ABS with 100% infill or 22% with 5 walls (2mm).
for Supports touching build plate should enough.
Category: 3D Printing