1 / 3
Plant Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Plantstand joints for DIY plantstands
- Ocena
- 4,5 / 5
- Polubienia
- 152
- Pobrania
- 177
- Wydruki
- 1
- Wyświetlenia
- 1987
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 6)Remiksy (0)Kolekcje (217)Powiązane
A simple Joint setup for a modern Plantstand.
The design is built for 1.5in diameter but the attached FreeCAD files can be adjusted for your needs.
You will need a few simple wood screws and you have to be able to cut the middle pieces to fit them in a cross (I used a circular table saw and it was quite easy to do)
Hope you enjoy it!