Stan and Kyle Keychains
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Single color keychains shaped like Stan and Kyle from South Park.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
Stan Marsh and Kyle Broflovski from the show South Park as simple single color key chains. Their faces and hats are extruded to different heights to give them more interest than simple outlines. Both are roughly 40mm wide, 50mm tall and 3.5mm at the thickest but you can scale them to whatever you want.
Printing
I set the heights based on a 0.2mm layer height. I also bumped the vertical perimeters up to 4 for strength in the key loop. No need for supports.
I printed Kyle in NinjaTek Cheetah and could not be happier with the results. MK3S, 0.4mm nozzle, 0.2mm layer height, PrusaSlicer 2.4.2 “Sainsmart TPU” filament profile