Dragon pillar (solidified)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Herostrong3d uploaded a detailed digital sculpture of a "spiral dragon pillar".
- Ocena
- 4,917 / 5
- Polubienia
- 458
- Pobrania
- 2421
- Wydruki
- 19
- Wyświetlenia
- 11 205
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution
Herostrong3d uploaded a detailed digital sculpture of a "spiral dragon pillar". However the original model's pillar is off center and the dragon relief is separated from the pillar on one side. I solidified the model which now prints as one piece.
The dragon pillar is a classic Chinese architecture element. A reference picture is included. Let it decorate your desk!
Print instructions
Category: Buildings & Structures Print Settings
Printer Brand: Prusa
Printer: i3 MK2S
Rafts: No
Supports: Yes
Resolution: 0.1mm
Infill: 10% 1 gradual step
Notes:
Print as tall as possible and at 0.1mm layer height to show maximum detail. Support everywhere at 75-80 degrees is necessary. Make sure to use a 1mm support interface otherwise support will be impossible to remove.