1 / 14
Ender 3 Pro PSU Cover for 60x10 fan and Raspberry Pi holder — zdjęcie 1
1 / 14

Ender 3 Pro PSU Cover for 60x10 fan and Raspberry Pi holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I redesign this PSU cover from scratch on Fusion 360 for better fitting on my setup. Also, changed the fan hole for a…

Ocena
0 / 5
Polubienia
4
Pobrania
19
Wydruki
0
Wyświetlenia
282
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

I redesign this PSU cover from scratch on Fusion 360 for better fitting on my setup. Also, changed the fan hole for a 60x60x10 5v fan (much quieter than original), a Raspberry Pi mount and a LM2596 mount directly from PSU wires.

I also installed the https://www.thingiverse.com/thing:4043475 fan silencer to avoid wind noise to PSU. This works very well.

Enjoy!

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

20%

Filament: 3DFila PLA Black


Notes:

Printed with brim for better adhesion

Category: 3D Printer Accessories

Tagi