D300VS SaberTusk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Still was having issues with getting good bridges and overhangs at fast printing speeds so I decided to just go with…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Still was having issues with getting good bridges and overhangs at fast printing speeds so I decided to just go with brute force cooling with two 5015 fans .
Works like a champ, can work too well. Make sure your hot end has a sock and you re-calibrate your hot end. Also slowly ramp up in your G-code. I normally only run it at 40% unless doing some crazy overhangs or bridges.
For the lower screw I had to go up a grip length and used a spacer to get the right amount of thread for the mount.
Category: 3D Printer Parts