Invisible Vinyl Record Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I Took inspiration from https://www.thingiverse.com/thing:3628510 But I ended up designing my own, since I wanted a…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 491
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
I Took inspiration from https://www.thingiverse.com/thing:3628510 But I ended up designing my own, since I wanted a few extra things. I wanted two magnets (4 total) to handle the extra weight of double/heavy albums and I wanted a hole so I can screw it into the wall, instead of use double-sided tape.
I also couldn't find magnets that were the same size as the ones listed, so I made the slots a different size to fit the 60x10x5 mm magnets that I could get a hold of.
The only thing I don't enjoy about this design, is that the cover ends up hanging open quite a bit. I don't want to just tape up the inside of the cover, so I am still working on a way to invisibly keep it closed as well. It isn't an issue mechanically, as everything stays up and nothing falls out. It just doesn't look great.
Print Settings
Printer Brand:
Creality
Printer:
CR-X
Rafts:
No
Supports:
No
Resolution:
.16
Infill:
20
Filament: Overture PLA Grey
Category: Art Tools